Solar Luminous Sphere 30 LED Polyethylene Indoor & Outdoor 6000k Sined

Sined professional 30 cm diameter LED light sphere. IP 65 waterproof, for all outdoor and indoor activities, garden, pool, hotel, spa, restaurant.
Thanks to the internal solar panel and the lithium battery, it does not need to be returned to the charging station every time; it can be left in the garden or by the pool.
The USB charging cable is only necessary for the first charge or if used indoors.
The supplied remote control allows changing colors and light effects
Made in Italy

Applications of the LED Light Ball
- Garden decoration.
- Event or wedding decoration.
- Nighttime decoration.
- Beach bar and chill-out area decoration.
- Relax area or spa decoration.
- Interior or venue decoration.
Features:
- The luminous part is RGB; you can change the color with the remote control, adjust intensity and the light effect (steady or flashing).
- You can charge the lithium battery via the supplied USB cable (if used indoors, recommended for the first charge).
- There is a button underneath to turn it on; then it stays on, charges during the day and turns on by itself at night; the light must be adjusted with the remote control.
- When the light intensity drops below a level, the system detects it and automatically turns the light on.
- There is a peg on the base to fix them firmly to the ground.


TECHNICAL SPECIFICATIONS
1) Lamp diffuser material: LLDPE
2) Lamp base material: ABS
3) Spike material: ABS
4) Light source:
2 pcs. RGB LED 0.5W
1 pc. LED 6000K 0.5W
5) Solar power:
1.5 W/ solar voltage:
5 V/ solar current: 300mA
6) Rechargeable lithium battery:
1 x 18650 , 1800 mAh, 3.7V
7) Operation: more than 12 hours.
8) Charging: with sunlight 12 to 15 hours,
alternatively charge with DC plug, 5 hours.
9) Power switch: red-green-blue-orange-blue-cyan, purple-white and continuous color change.
10) Waterproof rating: IP65


MADE BY ROTATIONAL MOLDING

Operation
The material, usually powder, is loaded into the mold and the mold is rotated simultaneously around two perpendicular axes inside the oven.
The powder gradually fluidizes during the heating phase, so that it reaches all points of the mold's interior surface.
This produces a thickness that will solidify in the subsequent cooling phase.
Rotational molding is a technological process that allows manufacturing hollow objects with uniform thickness without weld points.
It is a production technique with low environmental impact, since the fusion of the powders is carried out without direct contact with flames or heat sources.
The thermal oven works by heating the environment where the mold is located, which in turn heats and inductively molds the raw material it contains.

Final finish
This technique is especially advantageous due to the flexibility of the production process, the low generation of waste and the low cost of the molds used.
Liquid coatings are used for plastic finishing, as plastic material is more receptive to them. Especially suitable for metal and plastic surfaces, liquid paint has no limits in terms of shades and colors, making it suitable for the most varied applications