Solar Light Sphere 40 Led Polyethylene Outdoor and Indoor 6000k Sined

Professional Sined Led light sphere with a diameter of 40 cm. IP 65 waterproof, for all outdoor and indoor activities, garden, swimming pool, hotel, spa, restaurant.
Thanks to the internal solar panel and lithium battery, it is not necessary to return it to the charging station every time, but rather can be left in the garden or pool.
The USB charging cable is only necessary for the first charge or if used indoors.
The supplied remote control allows you to change the colors and light effects
Made in Italy

Applications of the LED Light Ball
- Garden decoration.
- Event or wedding decoration.
- Night decoration.< br>- Decoration of beach bars and chill out areas.
- Decoration of relaxation or spa areas.
- Decoration of interiors or premises.
Peculiarities:
- The luminous part is RGB, you can change the color with the remote control, the intensity and the lighting effect (steady or flashing).
- You can charge the lithium battery via the supplied USB cable (if you use it indoors, recommended for the first charge).
- Below there is a button to turn it on, then it stays on and charges during the day and turns on by itself at night, the light needs to be adjusted with the remote control.
- When the light intensity drops below one degree, the system detects it and automatically turns on the light.
- At the base there is a pin to fix them firmly to the ground.

TECHNICAL SPECIFICATIONS< /b>
1) Lamp diffuser material: LLDPE
2) Lamp base material: ABS
3) Spike material: ABS
4) Light source:
2 pcs. RGB LED 0.5W
1 pc. LED 6000K 0.5W
5) Solar energy:
1.5 W/ solar voltage:
5 V/ solar amperage: 300mA
6) Rechargeable lithium battery:
1 x 18650, 1800 mAh, 3.7V
7) Operation: more than 12 hours.
8) Charging: in sunlight 12 to 15 hours,
alternatively charge with DC plug, 5 hours.
9) Power switch: red-green-blue-orange-blue-cyan, purple-white and continuous color changing.
10) Waterproof class: IP65


MADE BY MOLDING ROTATIONAL

Operation
The material, usually powder, is loaded into the mold and rotated simultaneously about two perpendicular axes inside the oven.
The Powder gradually fluidizes during the heating phase, so that it reaches all points of the inner surface of the mold.
This produces a thickness that will become solid in the subsequent cooling phase.
Rotational molding is a technological process that allows manufacturing hollow objects of constant thickness without welding points.
It is a production technique with low environmental impact, since the fusion of powders is carried out without direct contact with flames or heat sources.
The thermal oven acts by heating the environment in which the mold is located, which in turn heats and molds the raw material it contains by induction.

Final finish
This technique It is especially advantageous due to the ductility of the production process, the low production of waste and the low cost of the molds used.
Liquid coatings are used for coating plastics, since the plastic material is more susceptible to them. Especially suitable for metal and plastic surfaces, liquid paint has no limits in terms of shades and colors, making it suitable for the most varied applications