Sined Sole Grigia Solar Shower for Curved Polyethylene Pool with Gray Footbath

If you want very hot water, choose from our Sined solar showers in black, grey, blue and red.

Exclusive design and components for this gray shower heated by solar energy, manufactured in PEHD, non-toxic high molecular density polyethylene, highly resistant to atmospheric agents, UV rays and chemical agents. Large shower head with specially designed anti-limescale nozzles.
With this solar shower we have gone further, you will find included the essential anti-limescale filter and the useful protection case. Healthy and hygienic to shower before and after a pleasant swim in the pool, your skin and hair will thank you.
Remember that the darker the color, the greater the output of the sun's heat. Always place the shower in the sunniest area during the day. You won't find another pool shower with the same solar heating!

Anti-limescale filter and practical gift storage bag

The jet of the solar shower head is much softer than the jet of a traditional shower or a tap, only cold water comes out of the footbath.

Construction details to highlight
Shower twice as thick as that of the competition.
Internal high pressure pipe of 12 KGS
Inlet tap
Height 226 cm, shower diameter 15.24 cm in brass.
The shower is subjected to an individual pressure test by immersion in a bathtub of water, after which is dried, re-checked and carefully packaged with personalized protection.

Complete with
- 25 liter water tank
- Height 226 cm
- Base diameter 20x21 cm
- Foot washing faucet
- Round shower diameter 15.24 cm 6# Brass
- Brass accessories
- Water filling tap inlet
- Drain plug
- Fixing plugs supplied
- Fixing with special protective nylon bushings
- Anti-limescale filter
- High quality mixing cartridge
- Recommended water pressure 3.5 bar
- Internal hoses with 12 kg pressure
- Weight 7.7 kg
- Includes a protective bag to store the shower

Some tipsThe fact that water comes out of the shower head after turning off the tap is not a defect but a technical requirement!
A solar shower is not a closed system. If there is a demand for hot water, cold water enters the tank from below through the valve and pushes the hot water already at the top of the tank out.
The entire shower body is filled of water and acts as solar heating.
The pressure that builds up as a result of heating can escape through the shower head.

Disassembly at the end of the season< br>During the winter period the shower must be COMPLETELY emptied of the water it contains. Additionally, the shower should be disassembled and stored in a dry place during the winter.
Failure to follow this warning may result in freeze damage to the product.
Freezing damage is not covered by warranty.
1) Turn off the shower and remove the garden hose.
2) To empty the shower, turn the mixer back to the HOT position (approx. 2 minutes) and open the drain plug.
3) Remove the fixing screws from the base and empty the remaining water from the bottom of the shower by tilting it (absolutely necessary!)

Cleaning
For cleaning Consumer detergents should be used. Do not use cleaning products containing solvents, abrasive cleaning products or hard sponges, brushes, etc.