Black Aluminum and Steel Solar Outdoor Shower Dino for Pool Sined

If you want very hot water, choose from our Sined solar showers in black, gray, blue, and red.

Functional and economical, with a large 26-liter tank and a foot wash tap, for many hot showers you can take anywhere without paying anything. You just have to choose where you want to install this heated solar shower model DINO from SINED,
Ergonomic with its stainless steel final piece and aluminum tank. Ideal for outdoor pools, gardens, public and private use. Unbeatable value for money.
Anti-limescale filter and practical protective bag to store it in 190 cloths, as a gift.
Height 225 cm, base dimensions 25x25 cm

The shower undergoes an individual pressure test by immersion in a water tub, after which it is dried, rechecked, and carefully packed with personalized protection.

Complete with
- Everything needed for assembly
- Ideal for garden pools.
- 26-liter water tank
- Height 225 cm
- 20x20 cm square shower in matte black metal
- Top shower with anti-limescale silicone nozzles
- Base dimensions 25x25 cm
- Foot wash tap
- Chrome accessories in matte black metal
- Anti-limescale filter
- High-quality mixing cartridge
- Recommended water pressure 3.5 bar
- Internal braided hoses 15 kg pressure
- Fixing plugs supplied
- Fixing with special nylon protection caps
- 190 fabric protection bag
- Inlet tap


Some tips
The water outlet from the shower head after closing the tap is not a defect, but a technical requirement.
A solar shower is not a closed system. If there is a demand for hot water, cold water enters the tank from below through the valve, expelling the hot water that is already at the top of the tank.
The entire body of the shower fills with water and acts as a solar heater.
The pressure created by the heating can escape from the shower head.

Dismantling at the end of the season
During winter, the shower must be COMPLETELY emptied of its water content. Additionally, the shower should be dismantled and stored in a dry place during winter.
Failure to comply with this warning may result in frost damage to the product.
Frost damage is not covered by the warranty.
1) Close the shower and remove the garden hose.
2) To empty the shower, turn the mixer back to the #HOT# position (approx. 2 minutes) and open the drain plug.
3) Remove the base fixing screws and empty the remaining water from the bottom of the shower by tilting it (this is absolutely necessary!).

Cleaning
Use cleaning products available on the market for cleaning. Do not use cleaning products containing solvents, abrasive cleaning products, or hard sponges, brushes, etc.